Hahn Drench Nozzle With Cap Type 361C Steinen Mfg. Co. 29 East Halsey Road, Parsippany, NJ 07054 973.887.6400 F: 973.887.4632 info@steinen.com www.steinen.com HAHN DRENCH W/CAP NOZZLE The Hahn DRENCH W/CAP nozzle has a blow-off protective cap. The nozzle sprays 10 gallons of water per minute (at 40 psi) in a wide angle (180º) spray and is generally used for flooding an area with water. The DRENCH W/CAP nozzle is manufactured by HAHN Industries, a Division of Steinen. • The DRENCH W/CAP nozzle is Steinen Part # 361-12266. • The protective cap is designed to blow-off between 2 - 5 psi water pressure. • This is a high flow nozzle with large water droplet sizes for flooding of a wide area. Place cap retention ring only at base of threads. HAHN DRENCH W/CAP Part # 361-12266 Use cap ONLY on Drench nozzles with an indent ring! Align cap behind arrow to ensure the cap blows back and away from the spray. • DO NOT USE THIS DRENCH W/CAP NOZZLE WHERE WATER PRESSURE MAY NOT EXCEED 20 PSI ! • DO NOT PLACE CAP RETENTION RING IN THE INDENT RING, ONLY AT THE BASE OF THE THREADS! • DO NOT ATTEMPT TO PUT THIS CAP ON A STANDARD HAHN DRENCH NOZZLE (361-12265; has no indent ring) AS THE CAP WILL NOT BLOW OFF ! • DO NOT ATTEMPT TO RETROFIT THESE CAPS ON OTHER NOZZLES ! RATED CAPACITY (gallons/minute) Nozzle Steinen Spray Type Part # 20 PSI 40 PSI 60 PSI 80 PSI 100 PSI Angle (approx.) DRENCH w/CAP 361-12266 7 10 12.3 14.1 15.8 180º 56 SteinenHahn-Type 361 WCAP-RA © 2016 Steinen Mfg.
Steinen Nozzle Catalog
To see the actual publication please follow the link above