Tan-Jet® Hollow Cone Type TF Type TM Steinen Mfg. Co. 29 East Halsey Road, Parsippany, NJ 07054 973.887.6400 F: 973.887.4632 info@steinen.com www.steinen.com Type TF (Female) Type TM (Male) Spray Characteristics Construction Materials Uniform hollow cone spray pattern with fine atomization at all pressures. Nozzles typically spray between 70 and 90 degree spray angles. These nozzles are nonclogging as they do not contain any cores or internal vanes. Nozzles are two-piece design with removable caps. Nozzles are available in 1/8", 1/4", 3/8", 1/2" and 3/4" NPT female connections. Stainless steel spray nozzles (330 stainless as well as 316 stainless), brass, steel and other materials upon request. Uniform hollow cone spray pattern with fine atomization at all pressures. Nozzles typically spray between 70 and 90 degree spray angles. These nozzles are nonclogging as they do not contain any cores or internal vanes. Nozzles are two-piece design with removable caps. Nozzles are available in 1/8", 1/4", 3/8", 1/2" and 3/4" NPT male connections. Stainless steel spray nozzles (330 stainless as well as 316 stainless), brass, steel and other materials upon request. Steinen has designed two different hollow cone spray nozzles, the Tan-Jet®. The advantage of the Tan-Jet® nozzle is the vortex created as a result of incoming liquid introduced at 90°. As the liquid leaves the nozzle, the liquid is uniformly atomized and a distinct hollow cone pattern is achieved. Two types of Tan-Jet® hollow cone, wide angle nozzles are available: • Type TF - NPT female threads • Type TM - NPT male threads Numerous flow rates are available from 0.08 gallons per minute (GPM) up to 42 GPM, at pressures from 3 PSI to 125 PSI, in various types of steel, stainless steel and brass. Steinen-Type T-RA 10 © 2016 Steinen Mfg.
Steinen Nozzle Catalog
To see the actual publication please follow the link above