|
|||
|
Nozzle Design Features and Benefits
Steinen has design a superior truly wide angle hollow cone spray nozzle, the Tan-Jet® wide angle hollow cone nozzle. The advantage of this nozzle is the vortex created as a result of incoming liquid introduced at 90°. As the liquid leaves the nozzle, the liquid is uniformly atomized and a very wide and distinct hollow cone pattern is achieved. The Tan-Jet® wide angle hollow cone nozzle is available in female NPT (Type TWF) or male threads (Type TWM). Numerous flow rates are available from 0.10 gallons per minute (GPM) up to 31 GPM, at pressures typically in the range of 5 PSI to 100PSI, in various types of steel, stainless steel and brass. For complete technical specifications, see the table at the bottom of the page. A PDF is also accessible at the bottom of this page. |
Call for Technical Sales
973-887-6400 ext. 101 |
||
Type TWF & TWM 
Construction - These nozzles are non-clogging because they do not contain any cores or internal vanes. Nozzles are a two piece design with removable caps. Nozzles available in 1/8" 1/4", 3/8", 1/2" and 3/4" male or female NPT pipe size connections. Materials - Stainless steel spray nozzles (303 stainless as well as 316 stainless), brass, steel and other materials available upon request. |
|||
|
|||
Back to TopPhone: 973-887-6400 Fax: 973-887-4632 E-mail: inquiries@steinen.com
© 2010 Steinen Privacy Policy Conditions of Use