Steinen has designed two different hollow cone spray nozzles, the Tan-Jet® and Spraylet™ hollow cone nozzles. The advantage of the Tan-Jet® nozzle is the vortex created as a result of incoming liquid introduced at 90°. As the liquid leaves the nozzle, the liquid is uniformly atomized and a distinct hollow cone pattern is achieved. The Spraylet™ is a low cost in-line nozzle that provides an excellent hollow cone with a more traditional nozzle mount.

The Tan-Jet® hollow cone nozzle is available in female NPT (Type TF) or male threads (Type TM). Numerous flow rates are available from 0.08 gallons per minute (GPM) up to 42 GPM, at pressures from 3 PSI to 125 PSI, in various types of steel, stainless steel and brass. The Spraylet™ is available in a 3/8” male NPT thread. Numerous flow rates are available from 0.2 gallons per minute (GPM) up to 2.5 GPM, at pressures from 10 PSI to 100 PSI, in brass.

Two types of nozzle construction are available:

• the two piece nozzle with a removable cap (Types TF & TM),
• and the economical in-line two piece removable cap (Spraylet).