|
||||
|
Call for Technical Sales
973-887-6400 ext. 101 The unique Square-Jet™ square spray nozzle can spray a nearly square spray pattern with uniform droplet distribution. The Square-Jet™ square spray nozzle is available in female NPT (Type SFQ) or male threads (Types SMQ, SSMQ & SSMQW). Numerous flow rates are available from 0.22 gallons per minute (GPM) up to 38 GPM, at pressures typically in the range of 3 PSI to 150PSI, in various types of steel, stainless steel and brass. Three types of nozzle construction are available:
|
||||
|
Type SFQ & SMQ 
|
Type SSMQ 
|
Type SSMQW 
|
||
|
Spray Characteristics - Square shaped spray with uniform distribution and atomization throughout the entire spray pattern. Atomization is finest at higher pressures. Nozzles spray between 55 and 80 degree spray angles. See product chart below for the angle you can expect at a certain flow rate and pressure.
Construction - Nozzle types SFQ and SMQ are of a three piece design. The nozzle cap and internal member are removable without disturbing the male or female pipe connection. Nozzles available in 1/8", 1/4", 3/8" & 1/2" male or female NPT pipe size connections. Materials - Stainless steel spray nozzles (303 stainless as well as 316 stainless), brass, steel and other materials available upon request. |
Spray Characteristics - Similar in spray to the SFQ & SMQ types. Square shaped spray between 55 and 90 degree spray angles. See product chart below for the angle you can expect at a certain flow rate and pressure.
Construction - Nozzle type SSMQ is a two piece design with a removable internal member. Nozzles available in 1/8", 1/4", 3/8", 1/2", 3/4" & 1" male NPT pipe size connections. Materials - Stainless steel spray nozzles (303 stainless as well as 316 stainless), brass, steel and other materials available upon request. |
Spray Characteristics - Wide angle square shaped spray with uniform distribution and atomization throughout the entire spray pattern. Nozzles spray is 105 degrees at 40 PSI. Call for quote on various flow rates.
Construction - Nozzle type SSMQW is a two piece design with a removable internal member. Nozzles available in 1/4" male NPT pipe size connection. Materials - Stainless steel spray nozzles (303 stainless) and brass. Other materials available upon request. |
||
|
||||
Back to TopPhone: 973-887-6400 Fax: 973-887-4632 E-mail: inquiries@steinen.com
© 2010 Steinen Privacy Policy Conditions of Use