|
|||
|
Call for Technical Sales
973-887-6400 ext. 101 The Solid-Jet® wide angle spray nozzle provides a solid (full) cone pattern over a broad surface area with uniform droplet distribution. This nozzle allows for a wide spray distribution where the nozzle needs to be closer the item being sprayed The Solid-Jet® wide angle spray nozzle is available in female NPT (Type SFW) or male threads (Types SMW & SSMW). Numerous flow rates are available from 0.22 gallons per minute (GPM) up to 50 GPM, at pressures typically in the range of 3 PSI to 150 PSI, in various types of steel, stainless steel and brass. Two types of nozzle construction are available:
|
|||
|
Type SFW & SMW 
|
Type SSMW 
|
||
|
Spray Characteristics - Uniform, solid cone spray pattern extended to a wide spray angle. The nozzle provides effective coverage of a wider area using fewer nozzles. Nozzles spray between 90 and 120 degrees. See product chart below for the angle you can expect at a certain flow rate and pressure.
Construction - Nozzle types SFW and SMW are of a three piece design. The nozzle tip and internal vane are removable without disturbing the male or female pipe connection. Nozzles available in 1/8", 1/4", 3/8", 1/2", 3/4" & 1" male or female NPT pipe size connections. |
Spray Characteristics - Spray characteristics are the same as the SFW & SMW types. See product chart below for the angle you can expect at a certain flow rate and pressure.
Construction - One-piece design, no cores or internal members to clog. Nozzles have 1/8" 1/4", 3/8", 1/2" and 3/4" male pipe size connections. |
||
|
Materials - Stainless steel spray nozzles (303 stainless as well as 316 stainless), brass, steel and other materials available upon request |
|||
|
|||
Back to TopPhone: 973-887-6400 Fax: 973-887-4632 E-mail: inquiries@steinen.com
© 2010 Steinen Privacy Policy Conditions of Use