MistJet® Hollow Cone Misting / Fogging Nozzles
Home > Industrial Spray Nozzles > Mist Jet Nozzles

Capacities: .37 to 35 gallons/hour (GPH)
Spray Angles: 70º, 80º & 90º

Type A: Nozzle Tip Only
Type AM: Nozzle in adapter with male thread
Type AF: Nozzle in adapter with female thread

Spray Characteristics -- Uniform hollow cone nozzle spray pattern with a fine micro-atomized mist spray. Fog-like spray results with pressures over 150 P.S.I. Spray angles of 70, 80, and 90 degrees are standard, measured @ 150 P.S.I.

Nozzle Applications:

greenhouse spray nozzle mist cooling spray nozzle humidification spray nozzle poultry spray nozzle fog systems spray nozzle coating spray nozzle dust suppression spray nozzle chemical spray nozzle livestock spray nozzle other fine spray nozzle applications

Call for Pricing

Construction -- Type A consists of basic nozzle tip with 9/16"-24 UNF connection and 100 mesh strainer (for capacities of 0.37, 0.50 and 0.75 GPH, a 200 mesh monel strainer is furnished). Type AM consists of Type A nozzle tip/strainer and 1/8", 1/4" or 3/8" NPT male adapter. Type AF consists of Type A nozzle tip/strainer and 1/8" or 1/4" female adapter.

Materials -- These fine spray atomizing nozzles are available in stainless steel (303 nozzles as well as 416 nozzles). Type “AM" (Male) and Type “AF" (Female) nozzle adapters are furnished in 303 stainless steel or brass. A 100 mesh monel screen is supplied as standard on strainer body.

Ordering Information: Specify

1. Type A (tip & strainer only); Type AM (tip & strainer with a male adapter); or Type AF (tip & strainer with female adapter)
2. Capacity in gallons/hour (GPH)
3. Spray angle - 70º, 80º & 90º (Note: 70º spray angle will be furnished unless otherwise specified)
4. Pipe size (eg. 1/8", 1/4" or 3/8")
5. Material – Nozzle: 416 or 303 stainless steel. Adapter: 303 stainless steel or brass

MistJet Hollow Cone Misting / Fogging Nozzle PDF Catalog Pages
Types A, AM, AF