|
|||
|
Nozzle Design Features and Benefits
Many customers require the widest flat spray possible. For those applications, Steinen has designed the Flo-Jet® flat spray wide angle nozzle (Steinen Type F nozzles). These wide angle flat spray nozzles achieve between 88° and 165° spray angles based on the flow rate of the nozzle and the operating pressure. See the table below for the spray angle you can expect at a given flow and pressure. Numerous flow rates are available from 0.10 gallons per minute (GPM) up to 57 GPM, at pressures from 3 PSI to 60 PSI, in various types of steel, stainless steel, brass and CPVC. For complete technical specifications, see the table at the bottom of the page. A PDF is also accessible at the bottom of this page. |
Call for Technical Sales
973-887-6400 ext. 101 |
||
|
Type F 
Spray Characteristics - Wide angle deflector type, low impact, flat spray pattern. This type of spray nozzle is useful for coating and cleaning processes. Spray angles, depending on pressure (see table below) can vary from 88 to 165 degrees. Information on capacities and angles not listed are available upon request. Spray exits the nozzle at a 70° degree angle. Construction - One-piece design, no cores or internal members to clog. Nozzles have 1/8" 1/4", 3/8", 1/2" and 3/4" male pipe size connections. Materials - Stainless steel spray nozzles (303 nozzles as well as 316 nozzles), Brass, and other materials available upon request. |
|||
|
|||
Back to TopPhone: 973-887-6400 Fax: 973-887-4632 E-mail: inquiries@steinen.com
© 2010 Steinen Privacy Policy Conditions of Use